2019 Hyundai Kona Rear Wiper Blade Size: A Comprehensive Guide

Serial Number: KNA-2019-05

Introduction

The Hyundai Kona is a subcompact crossover SUV that has quickly become a popular choice for drivers around the world. It is known for its stylish design, spacious interior, and impressive fuel economy. One aspect of the Kona that is often overlooked is its rear wiper system. Yet, maintaining a properly functioning rear wiper is essential for ensuring clear visibility in inclement weather conditions.

In this article, we will provide a comprehensive guide to the 2019 Hyundai Kona rear wiper blade size. We will cover the importance of using the correct blade size, the factors to consider when selecting a new blade, and step-by-step instructions on how to replace the rear wiper blade.

Why is Using the Correct Rear Wiper Blade Size Important?

Using the correct rear wiper blade size is essential for several reasons:

Ensures Optimal Performance: The correct blade size will match the curvature of the rear window, ensuring that the wiper blade can effectively sweep away water and debris.

Prevents Damage to the Rear Window: An incorrectly sized blade may not provide adequate coverage or may rub against the glass, causing scratches or other damage.

Improves Visibility: A properly sized blade will provide a clear and unobstructed view of the rear window, enhancing visibility and safety.

Factors to Consider When Selecting a New Rear Wiper Blade

When selecting a new rear wiper blade for your 2019 Hyundai Kona, there are several factors to consider:

Blade Length: The rear wiper blade for the 2019 Hyundai Kona has a length of 12 inches. This is a standard size that is available from a variety of manufacturers.

Blade Type: There are two main types of wiper blades: conventional and beam blades. Conventional blades are made of a metal frame with a rubber blade attached. Beam blades, on the other hand, have a single-piece design that combines the frame and the blade. Beam blades are generally more durable and provide better wiping performance.

Material: The material of the wiper blade itself is important for durability and performance. Some blades are made from natural rubber, while others are made from synthetic materials such as silicone or graphite. Synthetic materials can be more resistant to cracking and aging.

Brand: There are a number of reputable brands that manufacture wiper blades for the 2019 Hyundai Kona. Some of the most popular brands include Bosch, Michelin, and ACDelco.

How to Replace the Rear Wiper Blade on a 2019 Hyundai Kona

Replacing the rear wiper blade on a 2019 Hyundai Kona is a quick and easy process that can be completed in a few minutes. Here are the step-by-step instructions:

1. Gather Materials: You will need a new 12-inch rear wiper blade.

2. Locate the Wiper Arm: The rear wiper arm is located on the upper part of the rear window.

3. Lift the Wiper Arm: Gently lift the wiper arm upwards until it is perpendicular to the rear window.

4. Remove the Old Blade: Press the small tab located at the base of the wiper blade and slide the blade off the wiper arm.

5. Install the New Blade: Slide the new wiper blade onto the wiper arm, making sure that it snaps into place.

6. Lower the Wiper Arm: Carefully lower the wiper arm back onto the rear window.

7. Test the New Blade: Turn on the rear wiper system to test the new blade and ensure that it is wiping properly.

Conclusion

Replacing the rear wiper blade on a 2019 Hyundai Kona is a simple and affordable task that can contribute significantly to safe and clear visibility during inclement weather. By understanding the importance of using the correct rear wiper blade size, considering the factors involved in selecting a new blade, and following the step-by-step instructions provided in this article, you can ensure that your Kona is always prepared for the challenges of the road ahead.