How to Change a Rear Blade Wiper

Introduction

Keeping your car's wipers in good condition is essential for maintaining visibility while driving, especially during inclement weather. While front wipers are typically replaced more frequently, rear wipers can also deteriorate over time and need to be replaced eventually. Changing a rear blade wiper is a relatively simple task that can be completed quickly and easily with the right tools and instructions.

Step-by-Step Guide to Changing a Rear Blade Wiper

1. Gather Tools and Materials

New rear blade wiper

Soft cloth or paper towels

Step 2: Open Rear Wiper Arm

Locate the release mechanism for the rear wiper arm. It is typically a small lever or button located at the base of the arm.

Press the release mechanism and carefully lift the wiper arm away from the rear window.

Step 3: Remove Worn Wiper Blade

Hold the old wiper blade firmly and slide it down the wiper arm until it comes free. Be careful not to damage the wiper arm or any other components.

Step 4: Install New Wiper Blade

Align the new wiper blade with the wiper arm and slide it up until it snaps into place. Make sure it is securely attached.

Step 5: Close Wiper Arm

Carefully lower the wiper arm back onto the rear window. Make sure it is securely fastened and that the blade is making good contact with the glass.

Step 6: Test Wiper

Turn on the rear wiper and check its operation. Verify that the wiper is clearing the water or debris from the rear window effectively.

Tips for Successful Wiper Blade Replacement

Use a quality wiper blade designed for your specific vehicle.

Clean the rear window with a soft cloth or paper towels before installing the new wiper blade to remove any dirt or debris.

Inspect the wiper arm and blade regularly for signs of wear or damage. Replace them as needed to ensure optimal performance.

Keep your vehicle's windshield washer fluid reservoir filled to prevent the wipers from skipping or smearing.

Conclusion

Changing a rear blade wiper is a straightforward task that can be performed by anyone with basic mechanical skills. By following these instructions carefully, you can ensure that your rear wiper is functioning properly and providing you with clear visibility during inclement weather. Remember to replace your rear wiper blade regularly to maintain optimal performance and safety.