18330991235

marinco 1.5 wiper motor2024-07-11 08:28:19

Marinco 1.5 Wiper Motor: A Comprehensive Guide

SN: 1000-15-2023

Introduction

The Marinco 1.5 wiper motor is a vital component of marine vessels, providing reliable and efficient operation of wiper blades to ensure clear visibility during inclement weather conditions. This article will delve into the intricacies of the Marinco 1.5 wiper motor, exploring its features, specifications, troubleshooting tips, and maintenance procedures.

Features and Specifications

Voltage: 12 or 24 volts DC

Power: 1.5 amps

Torque: 30 inch-pounds

Speed: 78 strokes per minute

Rotation: Reversible (clockwise and counterclockwise)

Shaft Size: 5/16 inch

Mounting: Flush or surface

Enclosure: Water-resistant and corrosion-resistant

Operating Principle

The Marinco 1.5 wiper motor operates on the basic principle of electromagnetic induction. It consists of a stator with permanent magnets and a rotor with electrically charged coils. When an electric current flows through the coils, it creates a magnetic field that interacts with the stator's magnetic field, causing the rotor to rotate. The rotation of the rotor is transmitted to the wiper linkage, actuating the wiper blades.

Troubleshooting

Wiper blades not moving:

Check if the motor is receiving power

Verify the integrity of the wiring connections

Inspect the motor's internal components for any damage or wear

Wiper blades moving slowly:

Clean the motor and wiper linkage of any dirt or debris

Check the voltage supply to ensure it meets the motor's specifications

Lubricate the motor's bearings and linkage points

Wiper blades sticking:

Clean the wiper blades and windshield thoroughly

Check the wiper arm and blade mounting for proper alignment

Inspect the linkage for any obstructions or seized components

Maintenance

Regular maintenance is crucial to ensure the longevity and optimal performance of the Marinco 1.5 wiper motor. The following maintenance procedures are recommended:

Cleaning:

Regularly clean the motor and wiper linkage to remove dirt and debris

Use a soft brush and mild soap solution

Lubrication:

Periodically lubricate the motor's bearings and linkage points using a marine-grade lubricant

Inspection:

Visually inspect the motor and linkage for any signs of damage or wear

Check the wiring connections for corrosion or loose terminals

Advantages

Reliability: The Marinco 1.5 wiper motor is renowned for its durability and reliability in harsh marine environments.

Efficiency: The motor's high torque and speed ensure efficient and effective wiper blade operation.

Water Resistance: The water-resistant enclosure protects the motor from damage caused by moisture or water ingress.

Corrosion Resistance: The motor's corrosion-resistant materials ensure resistance to salt water and other marine elements.

Applications

The Marinco 1.5 wiper motor is extensively used in a wide range of marine applications, including:

Boats

Yachts

Fishing vessels

Workboats

Passenger ships

Conclusion

The Marinco 1.5 wiper motor is an essential component of marine vessels, providing crucial wiper blade operation for enhanced visibility during challenging weather conditions. Its rugged construction, reliable performance, and ease of maintenance make it an ideal choice for both recreational and commercial marine applications. By understanding the features, specifications, troubleshooting tips, and maintenance procedures outlined in this article, you can ensure the optimal functioning of your Marinco wiper motor for years to come.