Wiper Seal for Meyer E47 Snow Plow: Essential Maintenance for Optimal Performance

Introduction:

As the winter season approaches, ensuring the proper maintenance of your snow plow is crucial for effective snow removal and safety on the road. Among the critical components that require attention is the wiper seal, a vital element for maintaining a clear line of sight during snowy conditions. In this article, we will delve into the importance of the wiper seal for Meyer E47 snow plows and provide a step-by-step guide for its proper replacement.

Serial Number:

To ensure that you are purchasing the correct wiper seal for your Meyer E47 snow plow, it is important to have the serial number of your plow readily available. You can find the serial number on the plow's data tag, which is typically located on the blade assembly.

Importance of Wiper Seal:

The wiper seal plays a vital role in preventing snow, ice, and debris from accumulating on the windshield of your snow plow. By keeping the windshield clear, the operator maintains optimal visibility, enabling them to navigate safely and effectively in even the most challenging winter conditions. A worn or damaged wiper seal can compromise visibility, leading to hazardous situations and potentially causing accidents.

Symptoms of a Worn Wiper Seal:

Several signs indicate that your Meyer E47 snow plow's wiper seal may need replacement. These include:

Excessive snow and ice accumulation on the windshield: If you notice that snow and ice are rapidly accumulating on your windshield, it may be a sign that your wiper seal is worn or damaged, allowing debris to enter the blade assembly.

Streaking or smearing on the windshield: A worn wiper seal may allow moisture to seep into the blade assembly, causing the wiper blades to streak or smear the windshield, further obstructing your view.

Reduced wiping efficiency: If you find that your wiper blades are not effectively clearing the windshield or are skipping over areas, it may indicate that the wiper seal is worn and needs replacement.

Step-by-Step Wiper Seal Replacement Guide:

To replace the wiper seal on your Meyer E47 snow plow, follow these steps:

1. Gather necessary tools: You will need a flat-head screwdriver, a pair of pliers, and a new wiper seal.

2. Disconnect the battery: For safety reasons, disconnect the battery before starting any electrical work.

3. Locate the wiper seal: The wiper seal is typically located at the bottom of the snow plow blade, below the windshield.

4. Remove the old wiper seal: Use the flat-head screwdriver to gently pry the old wiper seal away from the blade assembly. Be careful not to damage the blade assembly in the process.

5. Clean the blade assembly: Once the old wiper seal is removed, use a clean cloth to remove any dirt or debris from the blade assembly.

6. Install the new wiper seal: Slide the new wiper seal into place, ensuring that it fits snugly against the blade assembly. Use the pliers to gently press the wiper seal into place.

7. Reconnect the battery: Once the wiper seal is installed, reconnect the battery.

8. Test the wiper blades: Turn on the wiper blades to ensure they are functioning properly and clearing the windshield effectively.

Conclusion:

Replacing the wiper seal on your Meyer E47 snow plow is a relatively simple task that can significantly improve visibility and safety during winter operations. By following the step-by-step guide provided in this article, you can ensure that your snow plow is ready to tackle even the toughest winter conditions. Regular maintenance of your snow plow, including the wiper seal, is essential for optimal performance, longevity, and safety on the road.