2008 Sequoia Wiper Windshield Back: A Comprehensive Review

Part 2

Introduction

The Toyota Sequoia is a full-size SUV that has been in production since 2000. The second generation of the Sequoia, which was produced from 2008 to 2021, is renowned for its spacious interior, powerful engine, and advanced features. One of the key components of the Sequoia's safety system is the wiper windshield back, which helps to keep the rear window clear of rain, snow, and other debris.

In this article, we will take a closer look at the wiper windshield back for the 2008 Sequoia. We will discuss its design, operation, troubleshooting tips, and more.

Design and Construction

The wiper windshield back for the 2008 Sequoia is a single-piece unit that is mounted to the rear hatch. It consists of a metal arm, a rubber blade, and a motor. The arm is attached to the hatch with a nut and bolt, and the blade is attached to the arm with a series of clips. The motor is located inside the hatch, and it is connected to the arm via a linkage.

The rubber blade is made of a durable material that is resistant to wear and tear. It is also designed to conform to the shape of the rear window, ensuring that it wipes away water and debris effectively.

Operation

The wiper windshield back is operated by a switch that is located on the dashboard. The switch has three positions: off, intermittent, and low. The intermittent setting causes the wiper to wipe the rear window at regular intervals, while the low setting causes the wiper to wipe the window continuously.

The wiper windshield back is also equipped with a rain sensor. The rain sensor is located on the windshield, and it detects the presence of rain. When rain is detected, the rain sensor automatically activates the wiper windshield back.

Troubleshooting

If the wiper windshield back on your 2008 Sequoia is not working properly, there are a few things you can check:

Check the fuse. The wiper windshield back is protected by a fuse that is located in the fuse box. If the fuse is blown, replace it with a new fuse.

Check the switch. The switch that operates the wiper windshield back may be faulty. To check the switch, remove the switch from the dashboard and test it with a multimeter.

Check the motor. The motor that drives the wiper windshield back may be faulty. To check the motor, remove the motor from the hatch and test it with a power source.

Check the linkage. The linkage that connects the motor to the arm may be damaged. To check the linkage, visually inspect it for any damage.

If you are unable to troubleshoot the problem yourself, you should take your Sequoia to a qualified mechanic for diagnosis and repair.

Conclusion

The wiper windshield back is an important safety component on the 2008 Sequoia. It helps to keep the rear window clear of rain, snow, and other debris, ensuring that the driver has a clear view of the road behind them. If you are having problems with your wiper windshield back, be sure to troubleshoot the problem and make repairs as necessary.