How to Replace Wiper Blades on a 2006 Scion xA

Introduction

Wiper blades play a crucial role in ensuring clear visibility during inclement weather conditions. Worn or damaged wiper blades can compromise your safety by failing to effectively remove rain, snow, or debris from your windshield. This guide will provide step-by-step instructions on how to replace the wiper blades on a 2006 Scion xA.

Materials Required

New wiper blades (recommended size: 22 inches for driver side, 16 inches for passenger side)

Clean cloth or paper towels

Safety Precautions

Park your vehicle on a level surface and engage the parking brake.

Turn off the engine and remove the key from the ignition.

Instructions

Step 1: Locate the Wiper Arm

Lift the metal wiper arm on the driver's side of the windshield. It will be slightly elevated from the glass.

Step 2: Unclip the Retainer

On the bottom of the wiper arm, locate the black plastic retainer. Press down on the tab at the center of the retainer to release it.

Step 3: Slide Off the Old Blade

While holding down the retainer, slide the old wiper blade straight out towards the back of the vehicle. It may require a gentle wiggle to detach it from the arm.

Step 4: Position the New Blade

Take the new wiper blade and align it with the metal hook on the wiper arm. The hook should fit into the slot on the blade.

Step 5: Secure the Blade

Press the new wiper blade onto the wiper arm until it clicks into place. The retainer will automatically snap back into position.

Step 6: Repeat for the Passenger Side

Follow the same steps on the passenger side to replace the old wiper blade with a new one.

Step 7: Check Operation

Start the engine and turn on the wipers. Verify that both blades are moving smoothly and making good contact with the windshield.

Tips

Replace wiper blades every 6-12 months or as needed.

Use high-quality wiper blades for optimal performance.

Clean the windshield with a glass cleaner to remove any dirt or debris that could damage the new blades.

If you have difficulty removing the old wiper blades, you can use a pair of pliers to gently pry them off.

Additional Information

If you encounter any problems or have further questions, consult your vehicle's owner's manual or a qualified mechanic.