How to Replace Wiper Strips

Introduction

Wiper strips are an essential part of your car's windshield wipers. They help to keep your windshield clean and clear, which is important for safe driving. Over time, wiper strips can become worn or damaged, which can reduce their effectiveness. If you notice that your wipers are not cleaning your windshield as well as they used to, it may be time to replace the wiper strips.

Materials You'll Need

New wiper strips

A screwdriver

A pair of pliers

A clean cloth

Instructions

1. Remove the old wiper strips. Start by lifting up the wiper arm.

2. Locate the screws that hold the wiper strip in place. There will typically be one or two screws on each side of the wiper strip.

3. Use a screwdriver to remove the screws. Be careful not to drop the screws.

4. Once the screws are removed, you can pull the old wiper strip off of the wiper arm.

5. Install the new wiper strips. Start by sliding the new wiper strip onto the wiper arm. Make sure that the wiper strip is facing the correct direction.

6. Tighten the screws to secure the wiper strip in place. Be careful not to overtighten the screws.

7. Lower the wiper arm.

8. Repeat the process for the other wiper strip.

Tips

When choosing new wiper strips, be sure to select the correct size for your car.

You can also purchase wiper strips that are specifically designed for different types of weather conditions.

If you are not comfortable replacing your wiper strips yourself, you can take your car to a mechanic.

Conclusion

Replacing your wiper strips is a relatively easy and inexpensive task that can help to improve the performance of your windshield wipers. By following these instructions, you can replace your wiper strips in just a few minutes.