Honda Civic Hybrid FB Wiper: A Detailed Overview (2011-2016)

 Introduction

The Honda Civic Hybrid FB was a highly efficient compact car produced from 2011 to 2016. As part of its innovative features, the Civic Hybrid FB was equipped with an advanced wiper system designed to provide clear visibility during inclement weather conditions. This article will comprehensively examine the Honda Civic Hybrid FB wiper, detailing its functionality, replacement procedure, and troubleshooting tips.

 Functionality

The Honda Civic Hybrid FB wiper system consists of two primary components: a wiper motor and a wiper transmission. The wiper motor, located at the base of the windshield, generates the power required to drive the wiper blades. The wiper transmission, connected to the motor, converts the motor's rotary motion into the linear motion needed to move the wiper blades across the windshield.

The system features three distinct wiper speeds: intermittent, low, and high. Intermittent mode allows the driver to set a customizable delay between each wiper sweep. Low speed provides a slow and steady wiping action, while high speed is designed for heavy rainfall or snowfall.

Additionally, the Honda Civic Hybrid FB wiper system includes an automatic rain-sensing feature. This feature utilizes a rain sensor located on the windshield to detect moisture and adjust the wiper speed accordingly. When rain is detected, the wipers will automatically activate and adjust their speed based on the intensity of the precipitation.

 Replacement Procedure

The replacement procedure for the Honda Civic Hybrid FB wiper involves the following steps:

1. Safety Precautions: Ensure the vehicle is parked in a safe location with the parking brake engaged.

2. Locate Wiper Arms: Identify the two wiper arms attached to the bottom of the windshield.

3. Remove Wiper Blade: Locate the small plastic tab at the center of the wiper blade. Press down on the tab and slide the blade straight up to detach it from the wiper arm.

4. Install New Wiper Blade: Align the new wiper blade with the wiper arm and slide it down until it securely clips into place.

5. Repeat for Other Side: Repeat steps 3 and 4 for the wiper blade on the opposite side of the windshield.

 Troubleshooting Tips

In case of any issues with the Honda Civic Hybrid FB wiper system, follow these troubleshooting tips:

1. Check Wiper Blades: Worn or damaged wiper blades can result in streaking or skipping on the windshield. Replace them if necessary.

2. Inspect Wiper Motor: The wiper motor may have failed if the wipers do not move at all. Contact a qualified mechanic for inspection and repair.

3. Verify Wiper Transmission: If the wipers move erratically or bind, the wiper transmission may be malfunctioning. Seek professional assistance for diagnosis and repair.

4. Test Rain Sensor: If the automatic rain-sensing feature is not functioning properly, clean the rain sensor located on the windshield with a soft cloth. If the issue persists, consult a mechanic.

The Honda Civic Hybrid FB wiper system is a crucial component that enhances visibility and driving safety during inclement weather conditions. By understanding its functionality, replacement procedure, and troubleshooting tips, vehicle owners can ensure optimal performance and maintain a clear field of vision while driving the Honda Civic Hybrid FB.