18330991235

Multifunctional Wiper

Kia Sorento 7 Seater Non-Hybrid Wiper (2020-Present)

1. Kia Sorento 7 Seater Non-Hybrid Wiper (2020-Present)The Kia Sorento is a seven-seater SUV that has been produced since 2002. The fourth generation of the Sor...

Free Inquiry

24 hours free inquiry phone18330991235

  • Product Details

1. Kia Sorento 7 Seater Non-Hybrid Wiper (2020-Present)

The Kia Sorento is a seven-seater SUV that has been produced since 2002. The fourth generation of the Sorento was introduced in 2020, and it is available in both hybrid and non-hybrid versions. The non-hybrid Sorento is powered by a 2.5-liter four-cylinder engine that produces 191 horsepower and 181 lb-ft of torque. It is available with either front-wheel drive or all-wheel drive.

Wiper System

The Kia Sorento 7 Seater Non-Hybrid comes standard with a front wiper system that includes two wiper blades. The wiper blades are made of a durable rubber material that is designed to resist wear and tear. They are also equipped with a wiper fluid reservoir that holds 3.0 liters of fluid.

The wiper system is controlled by a switch that is located on the dashboard. The switch allows the driver to select the wiper speed, as well as the intermittent wipe setting. The wiper system also includes a rain sensor that automatically activates the wipers when rain is detected.

Wiper Blade Replacement

The wiper blades on the Kia Sorento 7 Seater Non-Hybrid should be replaced every 6-12 months, or more often if they become damaged or worn. To replace the wiper blades, follow these steps:

1. Lift the wiper arm away from the windshield.
2. Pinch the release tab on the wiper blade holder.
3. Pull the old wiper blade straight out of the holder.
4. Insert the new wiper blade into the holder.
5. Make sure that the wiper blade is securely snapped into place.
6. Lower the wiper arm back onto the windshield.

Wiper Fluid Replacement

The wiper fluid reservoir should be checked regularly and filled as needed. To fill the wiper fluid reservoir, follow these steps:

1. Open the hood of the Sorento.
2. Locate the wiper fluid reservoir. It is typically located on the driver's side of the engine bay.
3. Unscrew the cap on the wiper fluid reservoir.
4. Fill the reservoir with wiper fluid until it reaches the "full" mark.
5. Screw the cap back on the reservoir.

Troubleshooting

If the wiper system on your Kia Sorento 7 Seater Non-Hybrid is not working properly, there are a few things you can check:

 Wiper blades: Make sure that the wiper blades are clean and free of debris. If the wiper blades are worn or damaged, they should be replaced.
 Wiper fluid: Check the wiper fluid reservoir to make sure that it is full. If the reservoir is empty, fill it with wiper fluid.
 Wiper motor: If the wiper blades and wiper fluid are working properly, the problem may be with the wiper motor. The wiper motor is located under the hood of the Sorento. If the wiper motor is not working, it should be replaced.

 

The Kia Sorento 7 Seater Non-Hybrid is a reliable and well-equipped SUV. The wiper system on the Sorento is designed to provide excellent visibility in all weather conditions. If you are having any problems with the wiper system on your Sorento, follow the troubleshooting tips provided in this article.