Mazda 3 BL Sedan Wiper (2009-2013): A Comprehensive Guide

The Mazda 3 BL Sedan, produced between 2009 and 2013, was known for its sleek design and reliable performance. As with any vehicle, its windshield wiper system plays a crucial role in ensuring clear visibility during inclement weather. This comprehensive guide provides detailed information about the Mazda 3 BL Sedan Wiper, including its specifications, replacement procedures, troubleshooting tips, and more.

 Specifications

Front Wipers:

 Type: Beam-type wiper blades
 Length: 24 inches
 Attachment: Pinch tab
 Quantity: Two

Rear Wiper:

 Type: Conventional wiper blade
 Length: 14 inches
 Attachment: Hook
 Quantity: One

 Replacement Procedures

 Front Wipers

1. Locate the wiper arm holding the wiper blade in place.
2. Lift the wiper arm away from the windshield to create a 90-degree angle.
3. Squeeze the release tab located at the base of the wiper blade.
4. Pull the wiper blade straight towards you to remove it.
5. Align the new wiper blade with the wiper arm and slide it onto the attachment point.
6. Push the wiper arm back onto the windshield until it locks into place.

 Rear Wiper

1. Open the rear hatch and locate the wiper arm.
2. Push the small button located on the wiper arm towards the base of the wiper blade.
3. Slide the wiper blade down the arm and off the attachment point.
4. Align the new wiper blade with the arm and slide it onto the attachment point until it clicks into place.

 Troubleshooting Tips

Wiper Blades Chattering or Smearing:

 Check the wiper blades for damage or worn rubber.
 Clean the windshield with a glass cleaner to remove any dirt or debris.
 Adjust the wiper arms to ensure proper contact with the windshield.

Wiper Blades Skipping or Missing Spots:

 Inspect the windshield for any scratches or dents that may interfere with the wiper blades.
 Check the wiper arm linkages for any loose connections.
 Clean the wiper blades with a damp cloth to remove any dirt or debris.

Wiper Motor Not Working:

 Check the wiper fuse for any blown or damaged fuses.
 Inspect the wiper motor wiring for any loose connections or damage.
 Test the wiper motor using a multimeter to determine if it is faulty.

 Maintenance Tips

 Replace wiper blades every 6 to 12 months or sooner if they show signs of wear.
 Clean the windshield regularly to prevent dirt and debris from accumulating.
 Inspect the wiper arms and linkages periodically for any wear or looseness.
 Use a hydrophobic windshield treatment to improve water beading and reduce wiper usage.

The Mazda 3 BL Sedan Wiper is an essential component of the vehicle's safety features, ensuring clear visibility during wet weather. By understanding its specifications, replacement procedures, troubleshooting tips, and maintenance recommendations, you can maintain the proper functioning of your wiper system and enjoy a safe and comfortable driving experience.