Peugeot 5008 Allure Pre Facelift Wiper (2018-2020)

The Peugeot 5008 Allure Pre Facelift (2018-2020) wiper is a key component of the vehicle's windshield cleaning system, ensuring optimal visibility during inclement weather conditions. This article provides a comprehensive overview of the wiper, its features, replacement instructions, and troubleshooting tips.

Features

 Variable-speed intermittent wiping: Allows for customization of the wiping frequency to suit different rainfall intensities.
 Rain sensor: Automatically activates the wipers when precipitation is detected.
 Aerodynamic design: Minimizes wind noise and improves wiping performance at high speeds.
 Durable construction: Made from high-quality materials to withstand harsh weather conditions.

Replacement Instructions

Tools Required:

 New wiper blade
 Clean cloth
 Optional: Wiper arm removal tool

Steps:

1. Locate the wiper arm: Lift the wiper assembly away from the windshield.
2. Release the wiper blade: Push the release button or lever located on the wiper arm.
3. Slide the old blade off: Pull the old blade straight towards you until it disengages from the arm.
4. Insert the new blade: Align the new blade with the wiper arm and slide it into place until it clicks securely.
5. Lower the wiper assembly: Gently lower the assembly back onto the windshield.
6. Test the wipers: Activate the wipers to ensure proper functioning.

Troubleshooting

Problem: Wipers not working

 Check the wiper fuse for any damage.
 Inspect the wiper motor for any signs of damage or corrosion.
 Verify that the wiper switch is properly engaged.

Problem: Wipers streaking or skipping

 Clean the windshield thoroughly to remove any dirt or debris.
 Check the wiper blades for any cracks or damage. Replace them if necessary.
 Adjust the wiper arm tension to ensure proper contact with the windshield.

Problem: Wipers chattering

 Ensure that the wiper blades are properly installed and secure.
 Clean the windshield thoroughly to remove any contaminants.
 Apply a wiper blade conditioner to improve blade flexibility.

Additional Tips

 Replace the wiper blades every 6-12 months to ensure optimal performance.
 Regularly inspect the windshield for cracks or chips that may impede wiper operation.
 Clean the wiper mechanism with a soft brush or cloth to remove any built-up dirt or debris.

Conclusion

The Peugeot 5008 Allure Pre Facelift (2018-2020) wiper is an essential component for maintaining clear visibility during rainy weather. By understanding its features, following the replacement instructions, and troubleshooting any issues, you can ensure the proper functioning of this critical system. Remember to consult your vehicle's owner's manual for specific information and guidance regarding wiper maintenance and replacement.
Peugeot 5008 Allure Pre-Facelift Wiper (2018-2020)

1. Introduction

The Peugeot 5008 is a compact crossover SUV manufactured by the French automaker Peugeot. The second generation of the 5008 was launched in 2017, and the Allure trim level offered a range of features and equipment. In this article, we will focus specifically on the pre-facelift version of the Peugeot 5008 Allure and its wiper system.

2. Wiper System Features

The Peugeot 5008 Allure pre-facelift wiper system comes with the following key features:

 Automatic Rain Sensor: The wiper system is equipped with an automatic rain sensor that detects the amount of rainfall and adjusts the wiper speed accordingly.
 Intermittent Setting: The wiper system offers an intermittent setting, allowing you to customize the frequency of the wiper sweeps.
 Two-Speed Operation: The wiper system can be operated at two speeds: normal and fast.
 Rear Wiper: A rear wiper is also included to provide visibility in wet conditions.

3. Wiper Blade Replacement

Replacing the wiper blades on the Peugeot 5008 Allure pre-facelift is a relatively straightforward process. Here's a step-by-step guide:

 Lift the Wiper Arm: Gently lift the wiper arm away from the windshield.
 Release the Blade: Press the release button on the wiper arm to detach the old wiper blade.
 Install the New Blade: Align the new wiper blade with the arm and snap it into place.
 Lower the Arm: Carefully lower the wiper arm back onto the windshield.

4. Wiper Motor and Linkage

The wiper motor and linkage are essential components of the wiper system, responsible for driving the wiper blades and maintaining the correct movement. In the Peugeot 5008 Allure pre-facelift, the wiper motor is located beneath the cowl, and the linkage is connected to the wiper arms.

5. Troubleshooting Common Wiper Problems

Like any other component, the wiper system on the Peugeot 5008 Allure pre-facelift can encounter occasional issues. Some common problems and their potential solutions include:

 Wiper Blades Streaking: Replace the wiper blades if they become worn or damaged.
 Wiper Motor Not Working: Check the wiring harness and fuses to ensure they are not damaged or loose.
 Wiper Linkage Binding: Inspect the linkage for any obstructions or corrosion that may restrict movement.

6. Maintenance and Tips

To ensure optimal performance of the wiper system, it is crucial to follow regular maintenance schedules and observe the following tips:

 Replace Blades Regularly: Change your wiper blades every 6-12 months, depending on the weather conditions.
 Clean Wiper Blades: Use a mild detergent solution to clean the wiper blades and remove debris.
 Lubricate Linkage: Occasionally lubricate the wiper linkage to minimize friction and smooth operation.
 Avoid Harsh Chemicals: Do not use harsh chemicals or abrasive cleaners on the wiper system.

The Peugeot 5008 Allure pre-facelift offers a comprehensive wiper system equipped with essential features such as an automatic rain sensor, intermittent setting, and two-speed operation. With proper maintenance and care, this wiper system will ensure clear visibility while driving in wet conditions.