18330991235

Multifunctional Wiper

Proton Satria Neo Wiper (2006-2015)

1. Proton Satria Neo Wiper (2006-2015): A Comprehensive Guide The Proton Satria Neo is a B-segment hatchback produced by Proton, a Malaysian automotive manufa...

Free Inquiry

24 hours free inquiry phone18330991235

  • Product Details

 1. Proton Satria Neo Wiper (2006-2015): A Comprehensive Guide 

 

The Proton Satria Neo is a B-segment hatchback produced by Proton, a Malaysian automotive manufacturer. It was first introduced in 2006 as a replacement for the Satria, and was discontinued in 2015. The Satria Neo was available with a variety of engine options, including a 1.3-liter, 1.6-liter, and 1.8-liter.

The Satria Neo's wiper system is designed to keep the windshield clear of rain, snow, and other debris. It consists of two wiper blades, one on the driver's side and one on the passenger's side. The wiper blades are made of a rubber compound that is designed to be durable and resistant to wear.

 Serial Number 

The serial number for the Proton Satria Neo wiper is located on the underside of the wiper blade. It is a 12-digit number that is unique to each wiper blade. The serial number can be used to track the wiper blade's warranty status and to order replacement parts.

 Wiper Blade Replacement 

The Proton Satria Neo's wiper blades should be replaced every six to twelve months, or more often if they are damaged or worn. To replace the wiper blades, follow these steps:

1. Open the hood of the Satria Neo.
2. Locate the wiper blades on the windshield.
3. Push the release button on the wiper blade and slide it off the wiper arm.
4. Slide the new wiper blade onto the wiper arm and snap it into place.
5. Close the hood.

 Wiper Motor Replacement 

The Proton Satria Neo's wiper motor is located under the dashboard on the passenger's side. To replace the wiper motor, follow these steps:

1. Disconnect the negative terminal of the battery.
2. Remove the wiper arms and blades from the windshield.
3. Remove the bolts that hold the wiper motor in place.
4. Pull the wiper motor out of the car.
5. Install the new wiper motor and tighten the bolts.
6. Reinstall the wiper arms and blades.
7. Connect the negative terminal of the battery.

 Troubleshooting 

If the Proton Satria Neo's wipers are not working properly, there are a few things that you can check:

 Check the wiper fuse. The wiper fuse is located in the fuse box under the dashboard on the driver's side. If the fuse is blown, replace it with a new fuse of the same amperage.
 Check the wiper motor. The wiper motor is located under the dashboard on the passenger's side. If the wiper motor is not működik, replace it with a new motor.
 Check the wiper transmission. The wiper transmission is located between the wiper motor and the wiper arms. If the wiper transmission is not working properly, replace it with a new transmission.
 Check the wiper blades. The wiper blades are made of a rubber compound that is designed to be durable and resistant to wear. However, over time, the wiper blades can become damaged or worn. If the wiper blades are damaged or worn, replace them with new wiper blades.

 Conclusion 

The Proton Satria Neo's wiper system is designed to keep the windshield clear of rain, snow, and other debris. It is important to keep the wiper system in good working condition in order to maintain good visibility while driving.