1. Toyota Fortuner Pre Facelift Wiper (2016-2019)

The Toyota Fortuner is a popular SUV that has been on the market for over a decade. The pre-facelift model of the Fortuner, which was produced from 2016-2019, is still a popular choice for many drivers. One of the important components of the Fortuner is its wiper system, which helps to keep the windshield clear of rain, snow, and other debris.

2. Types of Wipers

There are two main types of wipers used on the Toyota Fortuner pre facelift:

 Conventional wipers: These are the most common type of wiper and consist of a rubber blade attached to a metal frame. Conventional wipers are relatively inexpensive and easy to replace.
 Flat blade wipers: These wipers have a rubber blade that is attached to a flat, flexible frame. Flat blade wipers are more aerodynamic than conventional wipers and provide a quieter, more streak-free wipe.

3. Wiper Blade Size

The wiper blades on the Toyota Fortuner pre facelift are 26 inches long. It is important to use the correct size wiper blades for your vehicle, as using the wrong size can result in poor wiper performance.

4. Replacing Wiper Blades

Wiper blades should be replaced every 6-12 months, or more frequently if they are damaged or worn. Replacing wiper blades is a relatively simple task that can be done at home with a few basic tools.

5. To replace the wiper blades, follow these steps:

 Park the vehicle on a level surface and turn off the engine.
 Raise the wiper arms to the service position.
 Pinch the release tab on the wiper blade and slide the blade off of the wiper arm.
 Slide the new wiper blade onto the wiper arm and snap it into place.
 Lower the wiper arms back to their normal position.

6. Troubleshooting Wiper Problems

If you are experiencing problems with your wiper system, there are a few things you can check:

 Check the wiper blades for damage or wear.
 Check the wiper fluid reservoir to make sure it is full.
 Check the wiper motor fuse to make sure it is not blown.
 If you are still having problems, you may need to take your vehicle to a mechanic for further diagnosis and repair.

7. Conclusion

The Toyota Fortuner pre facelift wiper system is an important component of the vehicle, helping to keep the windshield clear of rain, snow, and other debris. By following the tips in this article, you can keep your Fortuner's wiper system in good working condition and ensure that you have a clear view of the road ahead.
1. Front Wiper

The Toyota Fortuner is a mid-size SUV that has been produced by Toyota since 2005. The second-generation Fortuner was introduced in 2015, and it received a facelift in 2020. The pre-facelift Fortuner (2016-2019) came with a number of different wiper options, including:

 Standard wipers: These wipers are the most basic type of wipers that come with the Fortuner. They are made of rubber and are designed to clear away rain and snow from the windshield.
 Aerodynamic wipers: These wipers are designed to reduce wind noise and improve visibility. They are made of a special material that helps to channel air around the wiper blade, which reduces drag and noise.
 Rain-sensing wipers: These wipers are equipped with a rain sensor that automatically turns on the wipers when it starts to rain. The wipers will adjust their speed and frequency based on the amount of rain that is falling.

2. Rear Wiper

The rear wiper on the pre-facelift Fortuner is a single-blade wiper that is located on the rear window. The wiper is activated by a switch on the dashboard.

3. Wiper Blades

The wiper blades on the pre-facelift Fortuner are made of rubber and are designed to last for about a year. However, the lifespan of the wiper blades can be shortened by factors such as exposure to sunlight, heat, and cold.

4. Wiper Motor

The wiper motor on the pre-facelift Fortuner is located under the dashboard. The motor is responsible for powering the wiper blades.

5. Wiper Linkage

The wiper linkage on the pre-facelift Fortuner is a series of arms and linkages that connect the wiper motor to the wiper blades. The linkage is responsible for moving the wiper blades back and forth across the windshield.

6. Wiper Fluid

The wiper fluid on the pre-facelift Fortuner is stored in a reservoir that is located under the hood. The fluid is used to clean the windshield and help to remove dirt and debris.

7. Wiper Troubleshooting

If you are having problems with the wipers on your pre-facelift Fortuner, there are a few things that you can check:

 Check the wiper blades: Make sure that the wiper blades are not worn or damaged. If the blades are worn, they will need to be replaced.
 Check the wiper motor: Make sure that the wiper motor is working properly. If the motor is not working, it will need to be replaced.
 Check the wiper linkage: Make sure that the wiper linkage is not damaged or loose. If the linkage is damaged, it will need to be replaced.
 Check the wiper fluid: Make sure that the wiper fluid reservoir is full. If the reservoir is empty, it will need to be filled.

If you are still having problems with the wipers on your pre-facelift Fortuner, you should take it to a qualified mechanic for further diagnosis.