Audi A1 3 Door Hatchback Car Wiper (2010-2017): A Comprehensive Guide

The Audi A1 Sportback is a subcompact hatchback car produced by Audi from 2010 to 2017. It was available in both three-door and five-door configurations. The A1 is known for its sporty handling and stylish design. One of the important features of the car is its wiper system, which plays a vital role in ensuring clear visibility during inclement weather.

Wiper System Components

The wiper system of the Audi A1 3 Door Hatchback consists of the following components:

 Wiper blades: The wiper blades are the rubber strips that come into contact with the windshield to remove water and debris.
 Wiper arms: The wiper arms are the metal arms that hold the wiper blades and move them across the windshield.
 Wiper motor: The wiper motor is the electric motor that powers the wiper arms.
 Wiper linkage: The wiper linkage is a series of gears and levers that connect the wiper motor to the wiper arms.
 Wiper control switch: The wiper control switch is the dashboard-mounted switch that allows the driver to control the speed and operation of the wipers.

Wiper Blade Replacement

Replacing the wiper blades on the Audi A1 3 Door Hatchback is a relatively simple procedure that can be performed at home with basic tools. Here are the steps involved:

1. Lift the wiper arms away from the windshield. To do this, gently pull up on the wiper arms until they lock into the upright position.
2. Pinch the release tab on the wiper blade. The release tab is located at the base of the wiper blade, where it connects to the wiper arm.
3. Slide the wiper blade off the wiper arm. Once the release tab is pinched, the wiper blade should slide off the wiper arm easily.
4. Slide the new wiper blade onto the wiper arm. Make sure that the new wiper blade is properly aligned with the wiper arm.
5. Push down on the wiper arm to secure the wiper blade. The wiper arm should snap into place, securing the new wiper blade.
6. Repeat the process for the other wiper blade.

Wiper Motor and Linkage Replacement

Replacing the wiper motor or wiper linkage on the Audi A1 3 Door Hatchback is a more complex procedure that requires specialized tools and knowledge. It is recommended that this procedure be performed by a qualified mechanic.

Wiper Control Switch Replacement

Replacing the wiper control switch on the Audi A1 3 Door Hatchback is a relatively straightforward procedure that can be performed at home with basic tools. Here are the steps involved:

1. Disconnect the negative battery terminal. This will prevent any electrical shorts from occurring.
2. Remove the steering wheel trim. The steering wheel trim is held in place by several screws. Remove the screws and carefully pry off the trim.
3. Remove the wiper control switch. The wiper control switch is held in place by two screws. Remove the screws and carefully pull out the switch.
4. Disconnect the electrical connector from the wiper control switch. The electrical connector is located at the back of the switch. Press the release tab on the connector and pull it apart.
5. Connect the electrical connector to the new wiper control switch.
6. Install the new wiper control switch. Push the new switch into place and secure it with the two screws.
7. Replace the steering wheel trim. Align the steering wheel trim with the steering wheel and push it into place. Secure it with the screws.
8. Reconnect the negative battery terminal.

Conclusion

The wiper system of the Audi A1 3 Door Hatchback is an essential safety feature that helps to ensure clear visibility during inclement weather. By following the instructions in this guide, you can replace the wiper blades, wiper motor, wiper linkage, or wiper control switch yourself, saving you time and money. However, if you are not comfortable performing any of these procedures, it is recommended that you consult a qualified mechanic.