1. Introduction to Audi A1 Car Wiper (2010-2018)

The Audi A1 is a subcompact hatchback manufactured by Audi. The first generation was produced from 2010 to 2018. The A1 is available in both three-door and five-door body styles.

The Audi A1 is equipped with a variety of features, including a rain-sensing wiper system. This system automatically activates the wipers when it detects rain on the windshield. The wipers can be set to one of four speeds, and the interval between wipes can be adjusted.

2. Serial Number

The serial number of the Audi A1 car wiper is located on the underside of the wiper arm. The serial number is a unique identifier that can be used to track the wiper in the event of a recall or warranty claim.

3. Function

The Audi A1 car wiper is a two-speed, automatic wiper system. The wipers are activated by a rain sensor located on the windshield. The rain sensor detects the amount of rain falling on the windshield and adjusts the wiper speed accordingly.

The wipers can be set to one of four speeds:

 Off: The wipers are not activated.
 Intermittent: The wipers wipe the windshield at a regular interval.
 Low: The wipers wipe the windshield at a slow speed.
 High: The wipers wipe the windshield at a high speed.

The interval between wipes can be adjusted using the wiper stalk. The interval can be set to one of four settings:

 Short: The wipers wipe the windshield every few seconds.
 Medium: The wipers wipe the windshield every few seconds.
 Long: The wipers wipe the windshield every few minutes.
 Auto: The wipers wipe the windshield automatically, based on the amount of rain falling on the windshield.

4. Troubleshooting

If the Audi A1 car wiper is not working properly, there are a few things that you can check:

 Check the wiper fluid reservoir. If the wiper fluid reservoir is empty, the wipers will not be able to clean the windshield.
 Check the wiper blades. If the wiper blades are worn or damaged, they will not be able to clean the windshield effectively.
 Check the wiper motor. If the wiper motor is not working properly, the wipers will not be able to move.

5. Replacement

If the Audi A1 car wiper is not working properly, it may need to be replaced. The wiper blades can be replaced by following these steps:

1. Lift the wiper arm off the windshield.
2. Push the tab on the wiper blade and slide the blade off the wiper arm.
3. Slide the new wiper blade onto the wiper arm.
4. Lower the wiper arm back onto the windshield.

The wiper motor can be replaced by a qualified mechanic.

6. Conclusion

The Audi A1 car wiper is a vital safety feature. The wiper system helps to keep the windshield clean and clear, so that the driver can see clearly. If the wiper system is not working properly, it should be inspected and repaired or replaced as soon as possible.