1. Introduction

The Ford Fiesta Sedan is a subcompact sedan that has been produced by Ford Motor Company since 2013. It is the sedan version of the Fiesta hatchback, and it shares many of the same features and components. The Fiesta Sedan is available in a variety of trim levels, and it can be equipped with a variety of options, including a sunroof, leather seats, and a navigation system.

2. Windshield Wiper System

The Ford Fiesta Sedan's windshield wiper system is designed to keep the windshield clear of rain, snow, and other debris. The system consists of two wiper blades that are mounted on the windshield. The wiper blades are made of a flexible material that conforms to the shape of the windshield. They are also equipped with a rubber edge that helps to remove dirt and debris from the glass.

3. Wiper Motor

The wiper motor is located under the dashboard. It is responsible for powering the wiper blades. The wiper motor is controlled by a switch that is located on the steering column. The switch allows the driver to select the desired wiper speed.

4. Wiper Fluid

The wiper fluid is stored in a reservoir that is located under the hood. The wiper fluid is sprayed onto the windshield by the wiper blades. The wiper fluid helps to remove dirt and debris from the glass.

5. Wiper Blade Replacement

The wiper blades should be replaced every 6 to 12 months. The wiper blades can be replaced by following these steps:

1. Open the hood.
2. Locate the wiper blades.
3. Lift the wiper blades up and off of the windshield.
4. Slide the new wiper blades onto the windshield.
5. Close the hood.

6. Wiper Motor Replacement

The wiper motor should be replaced if it is not working properly. The wiper motor can be replaced by following these steps:

1. Open the hood.
2. Disconnect the negative battery terminal.
3. Remove the wiper blades.
4. Remove the wiper motor.
5. Install the new wiper motor.
6. Connect the negative battery terminal.
7. Close the hood.

7. Wiper Fluid Reservoir Replacement

The wiper fluid reservoir should be replaced if it is cracked or leaking. The wiper fluid reservoir can be replaced by following these steps:

1. Open the hood.
2. Locate the wiper fluid reservoir.
3. Remove the wiper fluid reservoir.
4. Install the new wiper fluid reservoir.
5. Close the hood.

8. Troubleshooting

If the windshield wipers are not working properly, there are a few things that you can check:

 The wiper blades may be worn out.
 The wiper motor may be faulty.
 The wiper fluid reservoir may be empty.
 The wiper fuse may be blown.

If you are unable to resolve the problem, you should consult a qualified mechanic.

9. Conclusion

The Ford Fiesta Sedan's windshield wiper system is an important part of the car's safety features. It is important to keep the wiper system in good working condition to ensure that you can see clearly while driving in inclement weather.