Mazda 2 Sedan Car Wiper (2007-2014)

The Mazda 2 Sedan is a subcompact sedan that was produced by Mazda from 2007 to 2014. It was available in both front-wheel drive and all-wheel drive configurations, and was powered by a variety of gasoline and diesel engines. The Mazda 2 Sedan was known for its sporty handling and fuel efficiency, and was a popular choice for budget-minded consumers.

Wiper System

The Mazda 2 Sedan's wiper system is designed to clear rain, snow, and other debris from the windshield. It consists of two windshield wipers, a rear window wiper, and a washer fluid reservoir. The windshield wipers are controlled by a stalk on the left side of the steering column, and the rear window wiper is controlled by a button on the center console.

The washer fluid reservoir is located under the hood, and can be accessed by opening the hood and removing the cap. The washer fluid is dispensed through the windshield wipers when the washer fluid button is pressed.

Wiper Blades

The Mazda 2 Sedan's wiper blades are made of rubber, and are designed to conform to the shape of the windshield. They are attached to the wiper arms with a hook-and-loop system, and can be easily replaced when they become worn or damaged.

Wiper Motor

The Mazda 2 Sedan's wiper motor is located under the dashboard, and is responsible for driving the wiper arms. The wiper motor is controlled by the wiper switch, and can be set to operate at a variety of speeds.

Troubleshooting

If you are experiencing problems with the wiper system on your Mazda 2 Sedan, there are a few things you can check:

 Check the wiper blades: The wiper blades may be worn or damaged, and need to be replaced.
 Check the washer fluid reservoir: The washer fluid reservoir may be empty, and needs to be refilled.
 Check the wiper motor: The wiper motor may be faulty, and needs to be replaced.

If you are unable to resolve the problem yourself, you should take your Mazda 2 Sedan to a qualified mechanic.

Replacement

The Mazda 2 Sedan's wiper system is relatively easy to replace. The following steps will show you how to replace the windshield wipers and the rear window wiper:

1. Turn off the ignition: Before you begin, turn off the ignition and remove the key from the ignition switch.
2. Lift the wiper arms: Lift the wiper arms away from the windshield.
3. Remove the wiper blades: Push the tab on the wiper blade and slide the blade off the wiper arm.
4. Install the new wiper blades: Slide the new wiper blades onto the wiper arms.
5. Lower the wiper arms: Lower the wiper arms back onto the windshield.
6. Repeat steps 2-5 for the rear window wiper: Repeat steps 2-5 for the rear window wiper.

The Mazda 2 Sedan's wiper system is an important safety feature that helps to keep your windshield clear of rain, snow, and other debris. By following the steps in this article, you can keep your wiper system in good working order and ensure that you have a clear view of the road ahead.