Peugeot 508 Sedan Car Wiper (2010-2017)

The Peugeot 508 Sedan is a mid-size sedan produced by the French automaker Peugeot. It was first introduced in 2010 as a replacement for the Peugeot 407. The 508 Sedan was available in a variety of trim levels, including the entry-level Access, the mid-range Active, and the top-of-the-line Allure.

 Automatic Formatting

Serial Number: 1234567890

VIN: VF350800000123456

Model: Peugeot 508 Sedan

Year: 2010

Trim Level: Active

Engine: 2.0L Turbocharged Diesel

Transmission: 6-Speed Automatic

 Wiper System

The Peugeot 508 Sedan is equipped with a single wiper blade on the driver's side and a smaller wiper blade on the passenger's side. The wipers are controlled by a stalk on the left-hand side of the steering wheel.

The wiper system has three speeds:

 Intermittent: The wipers will wipe at a predetermined interval.
 Normal: The wipers will wipe at a constant speed.
 Fast: The wipers will wipe at their fastest speed.

The wiper system also has a "mist" setting, which will wipe the windshield with a small amount of water. This setting is useful for removing light dirt and debris from the windshield.

 Wiper Blade Replacement

The wiper blades on the Peugeot 508 Sedan should be replaced every 6-12 months, or more often if they become damaged. To replace the wiper blades, follow these steps:

1. Lift the wiper arm away from the windshield.
2. Pinch the release tab on the wiper blade and pull it away from the wiper arm.
3. Install the new wiper blade onto the wiper arm and snap it into place.
4. Lower the wiper arm back onto the windshield.

 Wiper Fluid Replacement

The wiper fluid reservoir is located under the hood, on the passenger's side of the engine. To fill the reservoir, simply unscrew the cap and pour in wiper fluid until the reservoir is full.

 Troubleshooting

If the wipers on your Peugeot 508 Sedan are not working properly, there are a few things you can check:

 Check the wiper fuse: The wiper fuse is located in the fuse box under the hood. If the fuse is blown, replace it with a new fuse of the same amperage.
 Check the wiper motor: The wiper motor is located under the cowl panel. If the motor is not running, it may need to be replaced.
 Check the wiper linkage: The wiper linkage is located between the wiper motor and the wiper arms. If the linkage is damaged, it may need to be replaced.

The Peugeot 508 Sedan is a well-equipped and reliable car. The wiper system is one of the most important safety features on the car, and it is important to keep it in good working condition. By following the tips in this article, you can keep your 508 Sedan's wipers working properly for years to come.