Proton Preve Car Wiper (2012-Present): An Essential Guide

Introduction

The Proton Preve, a compact sedan produced by Proton Holdings, has been on the market since 2012. It is known for its sleek design, advanced features, and safety ratings. One of the key components of any car is its wiper system, which plays a crucial role in maintaining visibility during inclement weather. This article provides a comprehensive guide to the Proton Preve car wiper, covering its features, replacement procedures, troubleshooting tips, and maintenance recommendations.

Features

1. Intermittent Wiper Function: The proton Preve wiper features an intermittent setting, allowing you to customize the wiper speed to suit the intensity of precipitation. This feature optimizes visibility while conserving wiper fluid.

2. Rain-Sensing Wipers: Advanced models of the Proton Preve come equipped with rain-sensing wipers. These wipers automatically activate and adjust their speed based on the amount of rainfall detected on the windshield.

3. Variable Wiper Speed: The wiper speed can be adjusted through a variable dial, allowing you to manually select the speed that suits the driving conditions.

4. Aerodynamic Design: The wiper blades are aerodynamically designed to minimize wind noise and ensure optimal performance.

5. Durable Blades: The wiper blades are made from high-quality rubber, providing excellent durability and performance.

Replacement Procedures

1. Identify the Correct Wiper Blades: Determine the length and type of wiper blades required for your Proton Preve. Consult your owner's manual or use an online wiper blade selector tool.

2. Lift the Wiper Arms: Gently lift the wiper arms away from the windshield. Avoid applying excessive force, as this could damage the arms.

3. Slide Off the Old Blades: Locate the release button or clip at the base of the wiper blade and press it to release the old blade. Slide the blade off the arm.

4. Align the New Blade: Place the new wiper blade on the wiper arm and align it with the hook or clip.

5. Secure the Blade: Lock the wiper blade securely onto the arm by pressing down until it clicks into place.

6. Lower the Wiper Arms: Once the new blades are installed, slowly lower the wiper arms back onto the windshield.

Troubleshooting Tips

1. Streaking or Smearing: Replace the wiper blades if they are worn or damaged. Clean the windshield using a glass cleaner to remove dirt and debris.

2. Chattering or Skipping: Adjust the wiper blade pressure by bending the arms slightly towards or away from the windshield. Ensure that the wiper blades are properly attached and not loose.

3. Poor Visibility: Replace the wiper blades if they have become worn or damaged. Clean the windshield and wiper blades thoroughly to remove any dirt or contaminants.

Maintenance Recommendations

1. Regular Cleaning: Clean the wiper blades and windshield regularly using a glass cleaner and a damp cloth. This will remove dirt, debris, and contaminants that can affect wiper performance.

2. Periodic Replacement: Wiper blades should be replaced every six months to one year depending on usage and weather conditions. Worn blades can cause streaks, skipping, and poor visibility.

3. Check Wiper Fluid: Ensure that the wiper fluid reservoir is filled with a good-quality wiper fluid. Top up the reservoir as needed.

4. Lubricate Wiper Arms: Occasionally lubricate the wiper arms and joints using a silicone-based lubricant. This will ensure smooth operation and prevent premature wear.

Conclusion

The Proton Preve car wiper is an essential component of the vehicle's safety features. By following the replacement procedures, troubleshooting tips, and maintenance recommendations outlined in this guide, you can ensure that your wiper system is operating at its peak performance, providing optimal visibility during inclement weather conditions. Proper maintenance and timely replacement of wiper blades will enhance not only the clarity of your vision but also the overall safety of your driving experience.