Proton Satria Car Wiper: A Comprehensive Guide to Fitment, Replacement, and Troubleshooting (1994-2006)

1. Introduction

The Proton Satria is a sporty hatchback that was produced by the Malaysian automaker Proton from 1994 to 2006. It was available in a variety of trims and engine configurations, and it was a popular choice among enthusiasts for its affordability and performance.

One of the important maintenance items on any car is the wiper blades. Wiper blades help to keep your windshield clear of rain, snow, and other debris, and they need to be replaced periodically to ensure optimal visibility.

In this article, we will provide a comprehensive guide to the Proton Satria car wiper, including information on fitment, replacement, and troubleshooting.

2. Wiper Blade Fitment

The Proton Satria uses a single wiper blade on the driver's side and a single wiper blade on the passenger's side. The wiper blades are 22 inches (550 mm) in length.

When replacing the wiper blades, it is important to choose the correct size and type of blade. There are two main types of wiper blades: conventional wiper blades and beam wiper blades. Conventional wiper blades have a metal frame that supports the rubber blade, while beam wiper blades have a flexible plastic frame that conforms to the curvature of the windshield.

Beam wiper blades are generally more expensive than conventional wiper blades, but they offer a number of advantages, including:

 Better visibility in all weather conditions
 Reduced noise and vibration
 Longer lifespan

3. Wiper Blade Replacement

Replacing the wiper blades on a Proton Satria is a relatively simple task that can be completed in a few minutes.

To replace the wiper blades, follow these steps:

1. Lift the wiper arm away from the windshield.
2. Pinch the release tab on the wiper blade and slide the blade off of the wiper arm.
3. Slide the new wiper blade onto the wiper arm until it clicks into place.
4. Lower the wiper arm back onto the windshield.

4. Troubleshooting

If you are having problems with your Proton Satria's wipers, there are a few things that you can check:

 Check the wiper fuse. The wiper fuse is located in the fuse box under the dashboard. If the fuse is blown, replace it with a new fuse of the same amperage.
 Check the wiper motor. The wiper motor is located under the cowl panel at the base of the windshield. If the wiper motor is not working, you may need to replace it.
 Check the wiper linkage. The wiper linkage is a series of rods and levers that connect the wiper motor to the wiper arms. If the wiper linkage is damaged, you may need to replace it.

5. Conclusion

Wiper blades are an important safety feature on any car, and they should be replaced periodically to ensure optimal visibility. Replacing the wiper blades on a Proton Satria is a relatively simple task that can be completed in a few minutes. If you are having problems with your Proton Satria's wipers, there are a few things that you can check to troubleshoot the problem.
 Proton Satria Car Wiper (1994-2006)

 Introduction

The Proton Satria wiper is a critical component of the vehicle's safety system, ensuring clear visibility during inclement weather. This article delves into the workings of the Proton Satria wiper system, covering its evolution, maintenance guidelines, and troubleshooting common issues.

 Evolution of the Proton Satria Wiper System

The original Proton Satria (1994) featured a simple mechanical wiper system with two speeds and an intermittent mode. The system was manually activated and adjusted using a stalk on the steering column.

In 1999, the Satria received an updated wiper system with an integrated intermittent delay feature. This allowed drivers to set a specific interval between wiper cycles, improving visibility in light rain or drizzle.

The third-generation Satria (2006) introduced an advanced electronic wiper control module. It provided variable wiper speeds, automatic rain sensing, and a one-touch mist function. The system was highly customizable, allowing drivers to tailor wiper behavior to their preferences.

 Maintenance and Care

To ensure optimal performance and longevity of the Proton Satria wiper system, regular maintenance is essential:

 Wiper Blade Inspection: Inspect wiper blades every 6 months or 10,000 kilometers. Replace them if they show signs of wear, such as streaking, skipping, or chatter.
 Wiper Arm Lubrication: Lubricate the wiper arms and pivots with a silicone-based grease every 6 months or 10,000 kilometers. This prevents squeaking and ensures smooth operation.
 Windshield Cleaning: Keep the windshield clean to prevent dirt and debris from accumulating on the wiper blades. Use a reputable glass cleaner and a soft cloth for best results.

 Troubleshooting Common Issues

1. Wiper Motor Not Functioning:
 Check the wiper fuse and replace it if necessary.
 Inspect the wiper motor wiring for damage or loose connections.
 Replace the wiper motor if it is faulty.

2. Wiper Blades Chattering:
 Check if the wiper blades are properly seated on the arms.
 Replace the wiper blades if they are old or damaged.
 Lubricate the wiper pivot points with silicone grease.

3. Wiper System Not Intermittent:
 Check the intermittent wiper relay. Replace it if faulty.
 Inspect the clock spring connecting the steering column to the control module. Clean or replace it as needed.

4. Rain Sensor Not Working:
 Clean the rain sensor lens on the windshield.
 Check the sensor wiring for loose connections or damage.
 Replace the rain sensor if it is not functioning properly.

The Proton Satria wiper system is a vital component of the vehicle's safety features. Regular maintenance and care are essential to ensure optimal performance and longevity. By adhering to the guidelines outlined in this article, Satria owners can maintain clear visibility and a safe driving experience in all weather conditions.