1. Proton Waja Car Wiper: An Overview

The Proton Waja is a compact sedan that was produced by Malaysian automaker Proton from 2000 to 2011. The Waja was based on the Mitsubishi Lancer platform and was available in both sedan and hatchback body styles. The Waja was a popular car in Malaysia and was also exported to other countries in Southeast Asia.

One of the important features of the Proton Waja is its wiper system. The wipers help to keep the windshield clean and free of debris, which is essential for safe driving. The Waja's wiper system is designed to be durable and efficient, and it can be adjusted to meet the needs of the driver.

 2. Types of Proton Waja Car Wipers

Proton Waja car wipers are available in two main types: manual and automatic. Manual wipers are controlled by the driver, who must use a lever to operate the wipers. Automatic wipers, on the other hand, are controlled by a sensor that detects rain and automatically turns on the wipers.

 3. Manual Proton Waja Car Wipers

Manual Proton Waja car wipers are the most basic type of wipers. They are controlled by a lever that is located on the steering column. The lever can be used to turn the wipers on and off, and to adjust the speed of the wipers.

Manual wipers are relatively inexpensive and easy to use. However, they can be inconvenient to use, especially in heavy rain.

 4. Automatic Proton Waja Car Wipers

Automatic Proton Waja car wipers are more convenient to use than manual wipers. They are controlled by a sensor that detects rain and automatically turns on the wipers. The sensor can also adjust the speed of the wipers based on the amount of rain.

Automatic wipers are more expensive than manual wipers. However, they can be worth the investment for drivers who want a more convenient and hassle-free driving experience.

 5. Replacing Proton Waja Car Wipers

Proton Waja car wipers should be replaced every 6 to 12 months. Wipers that are worn out can streak or smear, which can make it difficult to see while driving.

Replacing Proton Waja car wipers is a relatively easy task that can be done at home. The wipers are held in place by a small plastic clip. To remove the wipers, simply use a flat-head screwdriver to pry the clip loose. Once the clip is loose, the wipers can be pulled off of the windshield.

To install new wipers, simply reverse the removal process. Make sure to insert the new wipers into the clips securely.

 6. Conclusion

Proton Waja car wipers are an important safety feature that helps to keep the windshield clean and free of debris. Proton offers both manual and automatic wipers to meet the needs of different drivers. Wipers should be replaced every 6 to 12 months to ensure that they are working properly.
 Proton Waja Car Wiper (2000-2011)

1. Introduction

The Proton Waja is a compact car that was produced by the Malaysian automaker Proton from 2000 to 2011. The Waja was available in both sedan and hatchback body styles, and was offered with a variety of engine options, including a 1.6-liter, a 1.8-liter, and a 2.0-liter.

The Waja was a popular car in Malaysia, and was also exported to other countries in Southeast Asia. The car was known for its reliability, affordability, and spacious interior.

2. Windshield Wiper System

The Proton Waja's windshield wiper system is designed to keep the windshield clear of rain, snow, and other debris. The system consists of two wiper blades, a wiper motor, and a linkage system.

The wiper blades are made of a rubber compound that is designed to be durable and flexible. The blades are attached to the wiper arms, which are in turn connected to the wiper motor. The wiper motor is located under the dashboard, and is responsible for powering the wiper blades.

The linkage system is a series of gears and levers that connect the wiper motor to the wiper blades. The linkage system is designed to ensure that the wiper blades move in a smooth and even motion.

3. Wiper Blade Replacement

The wiper blades on the Proton Waja should be replaced every six months to one year. The blades can be replaced by following these steps:

1. Lift the wiper arms up into the service position.
2. Pinch the release tab on the wiper blade and slide the blade off of the wiper arm.
3. Slide the new wiper blade onto the wiper arm and snap it into place.
4. Lower the wiper arms back into the down position.

4. Wiper Motor Replacement

The wiper motor on the Proton Waja should be replaced if it fails to power the wiper blades. The wiper motor can be replaced by following these steps:

1. Disconnect the negative battery terminal.
2. Remove the wiper arms and wiper blades.
3. Remove the wiper motor mounting bolts.
4. Disconnect the electrical connector from the wiper motor.
5. Remove the wiper motor from the vehicle.
6. Install the new wiper motor in the reverse order of removal.
7. Connect the electrical connector to the wiper motor.
8. Install the wiper motor mounting bolts.
9. Install the wiper arms and wiper blades.
10. Connect the negative battery terminal.

5. Linkage System Replacement

The linkage system on the Proton Waja should be replaced if it becomes damaged or worn. The linkage system can be replaced by following these steps:

1. Disconnect the negative battery terminal.
2. Remove the wiper arms and wiper blades.
3. Remove the wiper motor.
4. Remove the linkage system mounting bolts.
5. Disconnect the linkage system from the wiper motor.
6. Remove the linkage system from the vehicle.
7. Install the new linkage system in the reverse order of removal.
8. Connect the linkage system to the wiper motor.
9. Install the wiper motor mounting bolts.
10. Install the wiper arms and wiper blades.
11. Connect the negative battery terminal.

6. Conclusion

The Proton Waja's windshield wiper system is an important safety feature that helps to keep the windshield clear of rain, snow, and other debris. The wiper system consists of two wiper blades, a wiper motor, and a linkage system. The wiper blades should be replaced every six months to one year, and the wiper motor and linkage system should be replaced if they fail.