Proton Wira Aeroback Car Wiper (1994-2003): A Comprehensive Guide

 1. Introduction

The Proton Wira Aeroback is a compact car produced by Proton, a Malaysian automobile manufacturer, from 1993 to 2007. It was based on the Mitsubishi Lancer platform and was available in sedan, hatchback, and station wagon body styles. The hatchback model, also known as the Aeroback, was introduced in 1994 and featured a sleek, aerodynamic design. This article will focus specifically on the car wiper system of the Proton Wira Aeroback produced between 1994 and 2003.

 2. Wiper Blade Specifications

The Proton Wira Aeroback uses two wiper blades, one for the driver's side and one for the passenger's side. The following are the specifications for the wiper blades:

- Length: 550 mm (21.7 inches)
- Material: Rubber
- Type: Beam-style

 3. Wiper Motor and Linkage

The wiper motor and linkage are responsible for moving the wiper blades across the windshield. The wiper motor is located under the dashboard on the passenger's side. It is connected to the wiper linkage through a series of gears and linkages. The wiper linkage is then connected to the wiper blades.

 4. Wiper Switch and Controls

The wiper switch is located on the left-hand side of the steering column. It controls the speed and operation of the wipers. The following are the different wiper settings:

- Off: Turns the wipers off.
- Intermittent: Wipers wipe at a set interval.
- Low speed: Wipers wipe at a slow speed.
- High speed: Wipers wipe at a high speed.
- Mist: Wipers wipe at a very slow speed, suitable for light rain or mist.

 5. Wiper Relay

The wiper relay is a small electrical device that controls the power supply to the wiper motor. It is located in the fuse box under the dashboard. If the wiper relay fails, the wipers will not operate.

 6. Windshield Washer System

The windshield washer system is used to clean the windshield of dirt, debris, and water. It consists of a washer fluid reservoir, a pump, and nozzles. The washer fluid reservoir is located under the hood and holds the washer fluid. The pump is located near the reservoir and draws fluid from the reservoir and pumps it through the nozzles. The nozzles are located on the hood and spray the washer fluid onto the windshield.

 7. Wiper Maintenance

To ensure optimal performance of the wiper system, it is important to perform regular maintenance. This includes the following:

- Inspecting the wiper blades for cracks, tears, or wear.
- Replacing the wiper blades every 6-12 months.
- Checking the wiper fluid level and refilling it as needed.
- Cleaning the windshield regularly.

 Conclusion

The Proton Wira Aeroback car wiper system is a重要なsafety feature that helps to improve visibility and ensure safe driving conditions. By understanding the components and operation of the wiper system, you can perform proper maintenance and keep your vehicle in good working order.