Special Wiper
Proton Wira Aeroback SE Wiper
The Proton Wira Aeroback SE Wiper: A Comprehensive Guide (1994-2003)Serial Number: WIP-WIRA-003IntroductionThe Proton Wira Aeroback SE, produced from 1994 to 2...
24 hours free inquiry phone18330991235
- Product Details
The Proton Wira Aeroback SE Wiper: A Comprehensive Guide (1994-2003)
Serial Number: WIP-WIRA-003
Introduction
The Proton Wira Aeroback SE, produced from 1994 to 2003, was a popular sedan in Malaysia. Maintaining its components, including the windshield wipers, is crucial for safe driving. This article provides a comprehensive guide to the Proton Wira Aeroback SE windshield wiper system, covering its features, maintenance tips, troubleshooting procedures, and replacement instructions.
Features
The Proton Wira Aeroback SE wiper system comprises the following components:
Wiper Motor: The electric motor powers the entire wiper mechanism.
Wiper Linkage: A series of jointed rods and levers that transmit motion from the motor to the wiper arms.
Wiper Arms: Metal arms that hold the wiper blades.
Wiper Blades: Rubber blades that wipe water and debris off the windshield.
The system offers several features:
Intermittent Wiper: Allows for adjustable wiper speed with pauses between swipes.
High and Low Speed Settings: Provides versatility for different weather conditions.
Park Position: Automatically returns the wipers to their resting position when turned off.
Maintenance Tips
To ensure optimal performance, follow these maintenance tips:
Clean Wiper Blades: Remove dirt, debris, and insects using a cloth dampened with glass cleaner.
Replace Wiper Blades Regularly: Inspect blades for wear and replace them every 6-12 months.
Check Fluid Reservoir: Top up the windshield washer fluid reservoir as needed.
Lubricate Linkage: Apply a thin layer of lubricant to the wiper linkage to reduce friction.
Troubleshooting
If you encounter any issues with your Proton Wira Aeroback SE wipers, try these troubleshooting steps:
Wiper Blades Skittering: Replace worn or dirty wiper blades.
Wiper Motor Not Operating: Check the wiper fuse and relay.
Wiper Arms Not Moving Smoothly: Lubricate the wiper linkage.
Wiper Park Position Incorrect: Adjust the wiper linkage or motor.
Replacement Instructions
Follow these steps to replace the windshield wiper blades on a Proton Wira Aeroback SE:
1. Lift the wiper arms away from the windshield.
2. Pinch the release tabs on the wiper blade and slide it off the arm.
3. Insert the new wiper blade onto the arm by hooking it onto the release tabs.
4. Push the blade down until it clicks into place.
5. Lower the wiper arms back onto the windshield.
Additional Information
The Proton Wira Aeroback SE uses a 16-inch driver-side wiper blade and a 14-inch passenger-side blade.
Recommended wiper blade brands include Bosch, PIAA, and Denso.
For more detailed repair instructions, consult the Proton Wira Aeroback SE service manual.
Conclusion
Maintaining the Proton Wira Aeroback SE windshield wiper system is essential for driving safety. By following the tips and procedures outlined in this article, you can ensure optimal performance, identify and resolve issues, and replace wiper blades as needed.
-
Volvo XC90 Car Wiper
Volvo XC90 Car Wiper: A Comprehensive GuideIntrodu...
-
Volvo XC60 Facelift Car Wiper
Volvo XC60 Facelift (2013-2017) Car Wiper: A Comp...
-
Volvo V40 Car Wiper
Volvo V40 Car Wiper (1996-2004): A Comprehensive ...
-
Volvo Wiper System in the S60
Volvo Wiper System in the S60 (2000-2009): A Comp...
-
Volvo 940 Car Wiper
Volvo 940 Car Wiper (1990-1998) The Volvo 940 is a...
-
Volvo 850 Sedan Car Wiper
Volvo 850 Sedan Car Wiper (1992-1997): A Comprehen...
-
Volkswagen Touareg Car Wiper
Volkswagen Touareg Car Wiper (2010-2018)Serial Num...
-
Volkswagen Tiguan Car Wiper
2011-2016 Volkswagen Tiguan Car Wiper: Comprehens...