Suzuki Vitara 1st Gen 3-Door Car Wiper (1988-1998)

The Suzuki Vitara is a compact SUV that was first introduced in 1988. It was available in both 3-door and 5-door versions, and was powered by a variety of gasoline and diesel engines. The Vitara was praised for its off-road capabilities, and was a popular choice for outdoor enthusiasts.

Windshield Wiper System

The windshield wiper system on the Suzuki Vitara 1st Gen 3-Door is a simple and effective design. It consists of two wiper blades that are mounted on a single wiper arm. The wiper arm is powered by an electric motor, which is located under the dashboard.

Wiper Blade Replacement

Replacing the wiper blades on the Suzuki Vitara 1st Gen 3-Door is a simple task that can be performed in a few minutes. To replace the wiper blades, follow these steps:

1. Park the vehicle on a level surface.
2. Turn off the engine.
3. Lift the wiper arm up until it is in the vertical position.
4. Pinch the release tab on the wiper blade and pull it away from the wiper arm.
5. Slide the new wiper blade onto the wiper arm until it clicks into place.
6. Lower the wiper arm back down onto the windshield.

Wiper Motor Replacement

The wiper motor on the Suzuki Vitara 1st Gen 3-Door is a relatively reliable component. However, if the wiper motor fails, it will need to be replaced. To replace the wiper motor, follow these steps:

1. Disconnect the negative battery terminal.
2. Remove the wiper arms and wiper blades.
3. Remove the bolts that hold the wiper motor in place.
4. Disconnect the electrical connector from the wiper motor.
5. Pull the wiper motor out of the vehicle.
6. Install the new wiper motor in the reverse order of removal.
7. Connect the negative battery terminal.

Troubleshooting

If you are experiencing problems with the windshield wiper system on your Suzuki Vitara 1st Gen 3-Door, there are a few things you can check:

 Check the wiper blades. The wiper blades may be worn or damaged, which can prevent them from wiping the windshield effectively.
 Check the wiper motor. The wiper motor may be faulty, which can prevent the wiper blades from moving.
 Check the electrical connections. The electrical connections to the wiper motor may be loose or corroded, which can prevent the wiper motor from receiving power.

Conclusion

The windshield wiper system on the Suzuki Vitara 1st Gen 3-Door is a simple and effective design. By following the tips in this article, you can keep your wiper system in good working order and ensure that you have a clear view of the road ahead.
 Suzuki Vitara 1st Gen 3 Door Car Wiper (1988-1998)

The Suzuki Vitara, also known as the Suzuki Escudo, is a compact SUV that was first introduced in 1988. The first-generation Vitara was available in both three-door and five-door configurations, and it was powered by a variety of gasoline and diesel engines. The Vitara was a popular choice for buyers who wanted a capable and affordable SUV, and it remains a popular choice for collectors today.

Windshield Wiper System

The windshield wiper system on the first-generation Suzuki Vitara is a simple and effective design. The wipers are powered by an electric motor, which is located under the dashboard. The motor drives a linkage that moves the wipers across the windshield. The wipers are controlled by a stalk-mounted switch on the steering column.

The wiper system has two speeds: low and high. The low speed is used for light rain or snow, while the high speed is used for heavy rain or snow. The wipers also have an intermittent setting, which causes them to wipe the windshield at a regular interval.

Wiper Blades

The wiper blades on the first-generation Suzuki Vitara are made of a rubber compound that is designed to be durable and long-lasting. The blades are attached to the wiper arms with a simple clip system.

It is important to replace the wiper blades regularly, as worn or damaged blades can reduce the effectiveness of the wiper system. Wiper blades should be replaced every six months to one year, or more often if they are used frequently.

Wiper Motor

The wiper motor on the first-generation Suzuki Vitara is a durable and reliable component. The motor is located under the dashboard, and it is protected from the elements. The motor is also sealed to prevent water and dirt from entering.

If the wiper motor fails, it will need to be replaced. Wiper motors are not difficult to replace, but it is important to consult with a qualified mechanic if you are not comfortable performing the repair yourself.

Troubleshooting

If you are having problems with the wiper system on your first-generation Suzuki Vitara, there are a few things you can check.

 First, check the wiper blades. Worn or damaged blades can reduce the effectiveness of the wiper system.
 Next, check the wiper motor. The motor may be seized or damaged.
 Finally, check the wiring. The wiring may be damaged or disconnected.

If you are not able to troubleshoot the problem yourself, you should consult with a qualified mechanic.

Conclusion

The windshield wiper system on the first-generation Suzuki Vitara is a simple and effective design. The wipers are powered by an electric motor, and they are controlled by a stalk-mounted switch on the steering column. The wiper system has two speeds: low and high, and it also has an intermittent setting.

It is important to replace the wiper blades regularly, as worn or damaged blades can reduce the effectiveness of the wiper system. Wiper blades should be replaced every six months to one year, or more often if they are used frequently.

If you are having problems with the wiper system on your first-generation Suzuki Vitara, there are a few things you can check. First, check the wiper blades. Next, check the wiper motor. Finally, check the wiring. If you are not able to troubleshoot the problem yourself, you should consult with a qualified mechanic.

Serial Number

The serial number for the first-generation Suzuki Vitara 3 Door Car Wiper is located on a metal tag that is attached to the wiper motor. The serial number is a 17-digit code that begins with the letter "S".

The serial number can be used to identify the wiper motor if it needs to be replaced. The serial number can also be used to track down the production history of the wiper motor.