Toyota Celica 3 Door Liftback Car Wiper (1989-1993)

Introduction

The Toyota Celica is a sports car that was produced by Toyota from 1970 to 2006. The Celica was available in a variety of body styles, including a 3-door liftback, which was produced from 1989 to 1993. The 3-door liftback was powered by a variety of engines, including a 1.6-liter inline-4, a 1.8-liter inline-4, and a 2.0-liter inline-4.

Windshield Wiper System

The Toyota Celica 3-door liftback is equipped with a windshield wiper system that consists of two wiper blades, a wiper motor, and a wiper transmission. The wiper blades are made of rubber and are designed to wipe away rain, snow, and other debris from the windshield. The wiper motor is located under the dashboard and is responsible for powering the wiper blades. The wiper transmission is located on the firewall and is responsible for converting the rotary motion of the wiper motor into the linear motion of the wiper blades.

Wiper Blade Replacement

The wiper blades on the Toyota Celica 3-door liftback should be replaced every six months or 12,000 miles, whichever comes first. To replace the wiper blades, follow these steps:

1. Park the car on a level surface and turn off the engine.
2. Lift the wiper blades away from the windshield.
3. Pinch the tabs on the sides of the wiper blade and pull the blade away from the wiper arm.
4. Insert the new wiper blade into the wiper arm and snap it into place.
5. Lower the wiper blades back onto the windshield.

Wiper Motor Replacement

The wiper motor on the Toyota Celica 3-door liftback is located under the dashboard. To replace the wiper motor, follow these steps:

1. Disconnect the negative battery terminal.
2. Remove the screws that hold the wiper motor in place.
3. Pull the wiper motor out of the engine compartment.
4. Disconnect the electrical connector from the wiper motor.
5. Install the new wiper motor and tighten the screws.
6. Reconnect the electrical connector to the wiper motor.
7. Connect the negative battery terminal.

Wiper Transmission Replacement

The wiper transmission on the Toyota Celica 3-door liftback is located on the firewall. To replace the wiper transmission, follow these steps:

1. Disconnect the negative battery terminal.
2. Remove the screws that hold the wiper transmission in place.
3. Pull the wiper transmission away from the firewall.
4. Disconnect the electrical connector from the wiper transmission.
5. Install the new wiper transmission and tighten the screws.
6. Reconnect the electrical connector to the wiper transmission.
7. Connect the negative battery terminal.

Conclusion

The Toyota Celica 3-door liftback is a reliable and affordable sports car. The windshield wiper system on the Celica is designed to provide clear visibility in all weather conditions. If you are experiencing problems with your Celica's wiper system, be sure to consult a qualified mechanic.