18330991235

Special Wiper

 Toyota Harrier ACU30 Import Car Wiper (2003-2013)

Toyota Harrier ACU30 Import Car Wiper (2003-2013) The Toyota Harrier is a mid-size SUV that was first introduced in 1997. The second generation of the Harrier,...

Free Inquiry

24 hours free inquiry phone18330991235

  • Product Details

 Toyota Harrier ACU30 Import Car Wiper (2003-2013)

 

The Toyota Harrier is a mid-size SUV that was first introduced in 1997. The second generation of the Harrier, the ACU30, was produced from 2003 to 2013. The ACU30 Harrier was available in both front-wheel drive and all-wheel drive configurations. It was powered by a variety of engines, including a 2.4-liter inline-four, a 3.0-liter V6, and a 3.5-liter V6.

 Wiper System

The ACU30 Harrier's wiper system consists of two wipers that are located on the front of the vehicle. The wipers are controlled by a stalk that is located on the left side of the steering wheel. The stalk can be used to turn the wipers on and off, as well as to adjust their speed.

The ACU30 Harrier's wiper system also includes a rear wiper. The rear wiper is located on the back of the vehicle and is controlled by a separate stalk that is located on the right side of the steering wheel.

 Wiper Blade Replacement

The wiper blades on the ACU30 Harrier should be replaced every six to twelve months, or more often if they are damaged. To replace the wiper blades, follow these steps:

1. Lift the wiper arm away from the windshield.
2. Pinch the tab on the wiper blade and pull it away from the wiper arm.
3. Slide the new wiper blade onto the wiper arm.
4. Push the tab on the wiper blade into place.
5. Lower the wiper arm back onto the windshield.

 Troubleshooting

If the wipers on your ACU30 Harrier are not working properly, there are a few things you can check. First, make sure that the wiper fuse is not blown. The wiper fuse is located in the fuse box under the hood. If the fuse is blown, replace it with a new one.

Next, check the wiper motor. The wiper motor is located under the cowl panel. To access the wiper motor, remove the cowl panel by removing the screws that hold it in place. Once the cowl panel is removed, you will be able to see the wiper motor.

If the wiper motor is not running, it may be necessary to replace it. However, before you replace the wiper motor, you should check the wiring to make sure that it is not damaged.

 Conclusion

The Toyota Harrier ACU30 is a reliable and well-built SUV. The wiper system on the ACU30 Harrier is designed to provide excellent visibility in all weather conditions. By following the tips in this article, you can keep your ACU30 Harrier's wiper system in good working order.