18330991235

Special Wiper

Toyota Innova Mk1 Car Wiper (2014-2016)

1. Toyota Innova Mk1 Car Wiper (2014-2016)1.1 IntroductionThe Toyota Innova Mk1, produced from 2014 to 2016, is a versatile and reliable MPV known for its spaci...

Free Inquiry

24 hours free inquiry phone18330991235

  • Product Details

1. Toyota Innova Mk1 Car Wiper (2014-2016)

1.1 Introduction

The Toyota Innova Mk1, produced from 2014 to 2016, is a versatile and reliable MPV known for its spacious cabin and impressive performance. One crucial component that ensures clear visibility during inclement weather is the car wiper system.

1.2 Wiper Blade Replacement

1.2.1 Front Wiper Blades

To replace the front wiper blades, follow these steps:

1. Lift the wiper arm away from the windshield.
2. Unhook the old wiper blade from the arm.
3. Align the new blade with the hook and snap it into place.
4. Lower the wiper arm back onto the windshield.

1.2.2 Rear Wiper Blade

1. Lift the wiper arm up and to the right.
2. Pinch the tab on the base of the wiper blade.
3. Slide the old blade out of the wiper arm.
4. Align the new blade with the tab and slide it into place.
5. Lower the wiper arm back onto the rear windshield.

1.3 Wiper Motor Replacement

1.3.1 Symptoms of a Faulty Wiper Motor

 Wipers not moving
 Wipers moving slowly or erratically
 Wipers making excessive noise
 Wipers moving only on certain speeds

1.3.2 Wiper Motor Replacement Procedure

1. Disconnect the negative battery terminal.
2. Locate the wiper motor assembly under the dashboard.
3. Unplug the electrical connector from the motor.
4. Remove the bolts holding the motor in place.
5. Lift the motor out of its housing.
6. Install the new motor and tighten the bolts.
7. Reconnect the electrical connector.
8. Reconnect the negative battery terminal.

1.4 Wiper Linkage Adjustment

The wiper linkage ensures that the wiper blades move smoothly and evenly across the windshield. If the wipers are skipping or not fully covering the windshield, the linkage may need to be adjusted.

1.4.1 Wiper Linkage Adjustment Procedure

1. Park the vehicle on a level surface.
2. Measure the distance between the center of the hood hinge and the edge of the windshield.
3. Adjust the wiper linkage by turning the adjusting screw until the wipers move smoothly and evenly across the windshield.
4. Retighten the adjusting screw.

1.5 Wiper Fluid Reservoir

The wiper fluid reservoir holds the liquid that is sprayed onto the windshield to remove dirt and debris.

1.5.1 Wiper Fluid Reservoir Location

The wiper fluid reservoir is typically located under the hood, near the firewall. It is usually a transparent container with a blue or green cap.

1.5.2 Wiper Fluid Level Check and Replenishment

1. Locate the wiper fluid reservoir.
2. Check the fluid level. It should be between the "MIN" and "MAX" marks.
3. If the fluid is low, remove the cap and add wiper fluid until it reaches the "MAX" mark.

1.6 Troubleshooting Common Wiper Problems

 Wipers not moving: Check the fuse, wiper motor, and electrical connections.
 Wipers moving slowly or erratically: Clean the wiper blades, check the wiper motor, and inspect the linkage for any damage.
 Wipers making excessive noise: Replace the wiper blades and check the linkage for any loose or worn parts.
 Wipers moving only on certain speeds: Check the wiper switch and electrical connections.
 Wipers skipping or not fully covering the windshield: Adjust the wiper linkage.

1.7 Conclusion

A properly functioning wiper system is essential for safe driving in wet or snowy conditions. By following the instructions outlined in this article, you can maintain and troubleshoot the wiper system on your Toyota Innova Mk1, ensuring clear visibility and enhanced driving safety.
Toyota Innova Mk1 Car Wiper (2014-2016)

Introduction
The Toyota Innova is a popular multi-purpose vehicle (MPV) known for its durability, practicality, and spacious interior. The first-generation Innova, known as the Mk1, was produced from 2004 to 2016. This article focuses specifically on the car wiper system of the Toyota Innova Mk1 produced from 2014 to 2016.

Automatic Formatting
To ensure optimal performance and visibility, the Toyota Innova Mk1 car wiper system is designed with automatic formatting. This feature allows the wipers to automatically adjust their speed and interval based on the intensity of rainfall. When the rain gets heavier, the wipers will increase their speed and decrease the interval between wipes. Conversely, when the rain becomes lighter, the wipers will slow down and increase the interval.

Serial Number
Each Toyota Innova Mk1 car wiper assembly has a unique serial number. This number can be found on a label attached to the wiper motor or on the wiper linkage. The serial number is important for ordering replacement parts and tracking warranty coverage.

Components of the Car Wiper System
The Toyota Innova Mk1 car wiper system consists of several key components:

 Wiper Blades: The wiper blades are made of a durable rubber material that conforms to the curvature of the windshield. They are responsible for wiping away water and debris from the glass.
 Wiper Arms: The wiper arms hold the wiper blades in place and connect them to the wiper motor. They are made of a lightweight and durable material, such as aluminum or steel.
 Wiper Motor: The wiper motor is the driving force behind the wiper system. It converts electrical energy into mechanical energy, which powers the wiper arms and blades.
 Wiper Linkage: The wiper linkage is a system of levers and gears that translates the motion of the wiper motor into the side-to-side movement of the wiper arms.
 Wiper Switch: The wiper switch allows the driver to control the speed and interval of the wipers. It is typically located on the dashboard or steering column.

Types of Wiper Systems
The Toyota Innova Mk1 offers two types of wiper systems:

 Conventional Wiper System: This system uses a single wiper arm that moves across the windshield in an arc-like motion.
 Intermittent Wiper System: This system uses a pair of wiper arms that move in opposite directions, pausing briefly between wipes.

Maintenance and Troubleshooting
To ensure optimal performance of the Toyota Innova Mk1 car wiper system, regular maintenance is essential. This includes:

 Inspecting the Wiper Blades: Check the wiper blades periodically for signs of wear or damage. Replace them when they become worn or ineffective.
 Cleaning the Wiper Arms: Use a damp cloth to wipe down the wiper arms and remove dirt or debris.
 Lubricating the Wiper Linkage: Apply a small amount of lubricant to the wiper linkage to minimize friction and prevent premature wear.
 Checking the Wiper Motor: If the wipers are not operating properly, check the wiper motor for any signs of damage or malfunction.

Troubleshooting:
If you experience any issues with the Toyota Innova Mk1 car wiper system, consult the vehicle's owner's manual or contact an authorized Toyota service center. Some common troubleshooting tips include:

 Wipers Not Moving: Check the wiper switch, fuse, and wiring.
 Wipers Moving Too Slowly: Check the wiper motor, linkage, or battery.
 Wipers Not Parking Correctly: Adjust the wiper linkage or check the wiper motor park switch.
 Wipers Streaking: Replace the wiper blades or clean the windshield.

Conclusion
The Toyota Innova Mk1 car wiper system is an essential component that enhances visibility and driving safety during rainfall. Proper maintenance and troubleshooting ensure optimal performance and longevity of this system. By following the guidelines outlined in this article, you can keep your Toyota Innova Mk1's wiper system functioning at its best for years to come.