2001-2005 Toyota RAV4 Car Wiper Replacement Guide

Introduction

The Toyota RAV4 is a compact SUV that has been produced since 1994. The second generation of the RAV4 was produced from 2001 to 2005. This guide will show you how to replace the wiper blades on a 2001-2005 Toyota RAV4.

Materials Needed

 New wiper blades
 A 10mm socket wrench
 A flathead screwdriver

Steps

1. Park the RAV4 on a level surface and turn off the engine.
2. Open the hood and locate the wiper blades.
3. Use the 10mm socket wrench to loosen the nuts that hold the wiper blades in place.
4. Remove the nuts and then lift the wiper blades off of the wiper arms.
5. If the wiper blades have rubber inserts, use the flathead screwdriver to pry the old inserts out of the wiper blades.
6. Insert the new rubber inserts into the wiper blades.
7. Slide the wiper blades back onto the wiper arms and tighten the nuts.
8. Close the hood and test the wiper blades to make sure they are working properly.

Tips

 It is a good idea to replace your wiper blades every six months to a year.
 If your wiper blades are streaking or chattering, it is a sign that they need to be replaced.
 You can purchase new wiper blades at most auto parts stores.
 If you are not comfortable replacing your wiper blades yourself, you can have a mechanic do it for you.

Conclusion

Replacing the wiper blades on a 2001-2005 Toyota RAV4 is a quick and easy process that can be completed in under 30 minutes. By following the steps in this guide, you can save money and keep your RAV4 looking and performing its best.